NAiS FP0-A80, Technical Manual

Page: 6 / 36

FP0 A/D Converter Unit Parts and Terminology
1-2 Matsushita Electric Works (Europe) AG
1.1 Parts and Functions
FP0–A80 A/D converter unit
1
Input range setting switches
2
Analog input
terminal block
3
Power supply
connector
6
Expansion hook
5
DIN rail attachment
lever
4
Expansion
connector
FP0
A80
1
Input range setting (DIP) switches (voltage/current)
This switch is used to change the input mode (between voltage and current). All eight
input channels of the A/D converter unit operate at the same level.
See page 2-3 for
details.
2
Analog input terminal block (9-pin)
Use a terminal block socket made by Phoenix Contact Co. (product number: 1840434).
(See
FP0 Hardware Manual.)
3
Power supply connector
The power supply connector (supply 24V DC) is hooked up by using the power supply
cable (AFP0581) that comes with the unit.
4
Expansion connector
The expansion connector hooks up the expansion unit to the internal circuit of this unit.
(See FP0 Hardware Manual.)
5
DIN rail attachment lever
The DIN rail attachment lever allows simple attachment to a DIN rail. The lever is also
used for installation on a FP0 slim type mounting plate (AFP0803).
6
Expansion hook
The expansion hook is used to secure expansion units.