9
PREPARATION
-
PLACING THE ELECTRIC BLANKET
(FIG. 1)
WARNING!
•
The electric blanket must only be placed between the mattress and the flat
sheet, not directly on top of people in the bed.
•
Make sure that the electric blanket is of the correct size for the mattress; do not
use a measure too bir or too small.
•
Make sure that the electric blanket is always properly laid out, avoiding
creases and wrinkles.
•
Lay the electric blanket
(A)
on the mattress
(1),
position
it with the cable outlet
at the head of the bed
(2),
wrap the elastic of the electric blanket around the
matt
re
ss
(3),
starting from the foot of the bed and then move on to the part of
the head.
•
Make sure that the electric under blanket is flat and tight to the mattress,
and that there are no folds or creases. At this point lay the first sheet
(B)
on the electric blanket, then make the bed as usual
(C).
The under blanket must be well covered as described above, this procedure
will enable a diffuse and pleasant warmth.
WARNING! Blanket for underneath.
•
Frequently check the appliance for signs of wear and tear. If such signs are
found or if the appliance has been used incorrectly, contact an authorised
technical service centre before continuing to use it.
•
We reccomend to people with a pacemaker to consult a doctor before using
the product. The generated electromagnetic fields could disturb the use of the
pacemaker; despite the emissions of our electric blanket are really far below
the limits, do not use it without a medical advice.
WARNING ! DO NOT OPEN THE POWER SUPPLY.
