Safety, Mains Plug and IEC Connector
2 safety
warNiNg: this aPParatus must Be earthed
the wires in this mains lead are coloured in
accordance with the following code and
connected as follows:
Brown:
Live (L)
Blue:
Neutral (N)
Green and Yellow: Earth
Never use the plug with the cover removed.
If the mains plug supplied does not suit the
socket in your home, it should be removed
and an appropriate plug fitted.
Note:
If the plug is removed from the mains
lead, no cable should be left attached in
the plug as this presents a serious hazard if
the plug is inserted in a live socket outlet.
3 mains Plug and ieC Connector
do not fit voltage dependent resistors or
noise suppressors into the mains plug. they
degrade the mains supply and the sound.
3.1 mains Plug wiring
Note:
The cable and plugs have been
designed and approved as a complete
lead assembly. We do not advise changing
either the cable or the plug to a different
type as this could cause safety problems.
If the mains plug is rewired the following
guidelines should be followed.
eu version
:
Gold Screw: Live/Hot/Line Brown Wire
Silver Screw: Neutral/Cold Blue Wire
Black Screw: Earth/Ground Green Wire
Cut Lengths: 28mm
Strip Lengths: 8mm
The terminal and cord grip screws should be
firmly tightened (maximum torque: terminal
screws 1.0Nm, cord grip 0.4Nm).
us version:
Black Screw: Live/Hot/Line Brown Wire
Silver Screw: Neutral/Cold Blue Wire
Green Screw: Earth/Ground Green Wire
Cut Lengths: 28mm
Strip Lengths: 8mm
The terminal and cord grip screws should be
firmly tightened (maximum torque 1.0Nm).
swiss version
:
Live/Hot/Line: Brown Wire
Neutral/Cold: Blue Wire
Earth/Ground: Green Wire
Cut Lengths: 28mm
Strip Lengths: 8mm
The terminal and cord grip screws should be
firmly tightened (maximum torque: terminal
screws 1.0Nm, cord grip 0.4Nm).
New Zealand version
:
Live/Hot/Line: Brown Wire
Neutral/Cold: Blue Wire
Earth/Ground: Green Wire
Cut Lengths: 40mm
Strip Lengths: 8mm
The terminal and cord grip screws should be
firmly tightened (maximum torque: terminal
screws 1.0Nm, cord grip 0.4Nm).
3.2 Naim ieC Connector
The IEC connector should not be
dismantled. The following information is
provided for compliance with statutory
requirements only.
3.2.1 Naim ieC Connector wire strip Lengths
If the IEC connector is rewired the following
cut and strip lengths must be used.
Earth (Green and Yellow):
Cut length:
28mm
Strip length:
8mm
Live (Brown) and Neutral (Blue):
Cut length:
25mm
Strip length:
8mm
Naim IEC connector: Type tested to EN60320-1, Nemko Report Number: 38993. Furutech FI-E35(R) has
KEMA-KEUR approval # 2076430.01. Wattgate 5266i is UL Listed: File E57672CSA Certified: File LR81290.
ERSO 1314 - ESTI approval # 04.0099. PDL Tapon Cat 940 Parkside Laboratories NZ Report #8004-00. Naim
Cable: UL File E61011 Style 20841.
