manualshive.com logo in svg

NAIM NAP V175, Owner'S Manual

Share
Download
NAIM NAP V175 Owner'S Manual Download Page 6

5.0 product introduction

This manual covers the installation and use of the 

av2

audio-visual processor and the 

nap

v175

three-channel power amplifier. Together these two components can add

comprehensive audio-visual capabilities to any Naim system.

The 

av2

is an audio processor for Dolby* Digital, Dolby Surround and DTS Digital

Surround™ encoded programme material. It is designed to decode and control audio
signals in multi-channel home theatre systems and to interface between an audio-visual
system and a conventional two channel audio system.

The 

av2

is fundamentally straightforward in use. However, its comprehensive functions

and setup flexibility mean that a little time spent reading this manual will help ensure
problem-free installation and use.

The 

nap v175

is a three channel power amplifier intended to drive a centre channel

speaker and a pair of either main front or surround channel speakers.

Following this product introduction, the manual is divided into the following
sections

:

6

av2 basics and quick setup.

This section provides an introduction to the basics of setting-up the 

av2.

For those

already familiar with the functions and operation of audio-visual processors the section
provides a diagram-based short-cut through the 

av2

setup routines.

7

av2 inputs and interfaces.

This section describes the signal input capabilities, input sockets and interface sockets of
the 

av2.

8

av2 outputs and interfaces.

This section describes the signal output capabilities, output sockets and interface sockets
of the 

av2

.

9

av2 detailed setup.

This section describes the setup of the 

av2

including use of the 

narcom av

remote

handset.

10

av2 operation.

This section describes the operation of the 

av2

including use of the 

narcom av

remote

handset.

11

av2 setup defaults.

This section illustrates the default 

av2

setup parameters.

12

av2 connection diagrams.

This section contains an illustration of the 

av2

connection panel, and diagrams

illustrating integration of the 

av2

into both conventional and dedicated audio-visual

systems.

13

nap v175 installation and operation.

This section describes the installation and operation of the 

nap v175

.

14

nap v175 connection diagram.

This section contains an illustration of the 

nap v175

connection panel.

5

av2/nap v175

note

* Dolby is a trademark of Dolby Laboratories. 
“DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of Digital Theater Systems Inc.

Summary of Contents for NAP V175






























Reviews:

No comments

Brands by name

Popular brands

Load more brands