NAIM NAP 350, User Manual

Page: 9 / 160

6
EN
Ensure the volume is turned down on the preamplifier before switching on the NAP 350
amplifiers. If you are using the system automation connection to a Naim preamplifier, the
power amplifiers will switch on automatically when any of the standby buttons is pressed.
If you are using a different preamplifier, press the Standby button on the front panel of
both NAP 350 amplifiers.
4. Tips on Installing and Using Your NAP 350
We know you are eager to enjoy your new NAP 350, but we promise it will sound even
better once you have followed these guidelines, all designed to help you experience your
power amplifiers without compromise.
4.1 Unboxing and positioning
Your NAP 350 uses high-quality components, including a substantial power transformer
and durable aluminium casing. That means the NAP 350 weighs in at 16.5kg, so please
take care when lifting or moving it, and ensure the surface you plan to place it on is stable
and can support its weight.
For optimum performance, use your Naim products on a dedicated hi-fi equipment rack
– ideally the Naim Fraim or Fraim Lite – to minimise vibrations that can affect sound. No
room for a rack? Consider placing your NAP 350 on a Fraim glass shelf on a suitable piece
of furniture, to provide solid but discreet support.
Your NAP 350 features fan-assisted cooling, designed to activate when your amplifier
runs at high volumes for a sustained time. Please ensure the heat outlet is not covered; we
would not recommend using the NAP 350 in a closed, non-vented cabinet.
Never stack Naim products on top of each other, and if you are placing them side-by-
side, please leave some distance between the units. Equally, connected products should
not sit too far apart: the maximum separation distance is that allowed by the supplied
interconnect lead.
To reduce the risk of audible hum from the loudspeakers do not place power supplies or
power amplifiers close to source components.