E11
cd
in
tuner
in
hdd in/
out
av
in/out
signal
ground
aux 2 in
(alternative)
aux 1
in/out
aux 2
in
NAC 282, NAC 202 & NAC 152 XS
10.7.1 Power Supply Upgrade Options
Preamplifier
Stage 1 Upgrade
Stage 2 Upgrade
Stage 3 Upgrade
NAC 282
Use: Hi-Cap
Use: 2 x Hi-Cap
Use: SuperCap
Connect to: Upgrade 1 socket
Connect to: Upgrade 1 & 2 sockets
Connect to: Upgrade 1 & 2 sockets
Connect: Power amp to Hi-Cap
Connect: Power amp to Hi-Cap 1
Connect: Power amp to SuperCap
NAC 202
Use: NAPSC
Use: Hi-Cap
Use: SuperCap
Connect to: NAPSC socket
Connect to: Upgrade 2 socket
Connect to: Upgrade 2 socket
Connect: Power amp to preamp
Connect: Power amp to Hi-Cap
Connect: Power amp to SuperCap
NAC 152 XS
Use: FlatCap XS (both outputs)
Use: FlatCap XS and Hi-Cap
Use: 2 x Hi-Cap
(see
Note
)
Connect to: Upgrade 1 & 2 sockets
Connect to: Upgrade 1 & 2 sockets
Connect to: Upgrade 1 & 2 sockets
Connect: Power amp to Flatcap XS
Connect: Power amp to Hi-Cap
Connect: Power amp to Hi-Cap 2
to power
amplifier
with
internal
power
supply
11.1 NAC 282 Rear Panel Sockets
cd/RCA Phono
ch1(L)
ch2(R)
aux 2/RCA
Phono
ch1(L)
ch2(R)
RS232
interface
RC5 in
Note:
The NAC 282 Aux 2 input is provided with two sockets.
The lower socket, fitted on delivery with a blanking cover, is
intended for use with a StageLine or SuperLine Phono stage
and incorporates an appropriate DC power supply. The two
sockets must not be used simultaneously.
Note:
The RS232 interface is an optional upgrade. It can be
specified at time of order or fitted retrospectively. Contact
your local representative or Naim Audio directly for further
information.
to NAPSC
power supply/output option sockets
with link and blanking plugs fitted
ch1
-ve
nc
nc
ch2
cd, tuner and aux
2 inputs
ch1
-ve
ch1
(out)
ch2
(out)
ch2
hdd, av and aux 1
inputs
+ve
-ve
+ve
ch1
ch2
aux 2
(alt.) input
11 NAC 282, NAC 202 and NAC 152 XS
Rear Panel Connections
Note:
A NAC 152 XS may also be powered by a single FlatCap even if one FlatCap output is already
in use to power a CD5 XS CD player. The FlatCap should be connected to the preamplifier Upgrade 1
socket with the power amplifier left connected directly to the preamplifier.
Note:
Section 12 comprises diagrams illustrating some of these power supply options.
