NAGRA – CLASSIC PREAMP
34
OPERATION OF YOUR CLASSIC PREAMP
__________________________________________________________
Proceed only if you have completed the installation steps as
described in the previous chapter INSTALLATION OF YOUR CLASSIC
PREAMP.
Power On
To use your preamplifier, you must push the mains power switch to
position
1
(
ON
) first. The mains power switch is located on the rear
panel (please see page 32)
The typical Nagra rotary selector offers 4 positions.
OFF: similar to STANDBY. The unit is
still powered but the consumption
remains very low.
R: is for Remote Control use.
MUTE: the unit is turned on but the
signal is muted. No sound.
ON: the unit is playing normally.
This table sums up the different positions vs. actions.
Mains switch
Nagra selector
Action
0
Any
The unit is switched off
I
OFF
The unit is in standby
I
R
The unit can be triggered
on and off remotely
I
MUTE
The unit is on and muted
(for
warming
up
for
instance)
I
ON
The unit is playing
