7
Nagra –
Concept CD player
Connecting the ACPS II power supply
Place the front panel selector on the OFF position. Insert the LEMO plug from the
ACPS II power supply into the POWER IN connector of the connection block.
Using the ground connector
The CD player is equipped with a connector which is directly linked to its casing.
This allows for consistent earthing of the various audio components.
In specific cases, using this connection can cause damage to your system.
It is imperative to contact your Nagra dealer, who will be able to advise you on
the usefulness of this connection according to your setup.
After connection of the Lemo plug,
connect the ACPS II to the mains via
the IEC cable.
Illumination of the ACPS II's red LED
(Light-Emitting Diode) indicates the
output of direct current. If the LED is
off, check the connection of the IEC
mains cable and the delivery of current
to the mains plug.
The Lemo plug features a red dot
that must be facing upwards for
correct insertion into the power input
connector.
You will hear a click, indicating that
the plug is securely locked in.
To disconnect the Lemo plug.
Hold the fluted section of the plug as
shown in the picture and pull
backwards.
