NAG/IM/650-H/01/22
22
Maintenance:
Clean the instrument by following the below instructions.
Before cleaning the calibrator, you must switch it off,
allow it to cool down and remove all cables.
Users should / must carry out the following cleaning
procedures as and when required.
Exterior of the instrument -
Clean using water and a soft
cloth.
The cloth should be wrung out hard to avoid any
water penetrating the calibrator and causing damage.
Insert -
Must always be clean and should be regularly
wiped using a soft lint free, dry cloth. You must ensure
that there are no textile fibers on the Insert when it is
inserted in the well. The fibers may adhere to the well
and damage it.
Adjusting and calibrating the instrument
You are advised to return the calibrator to Nagman, Chennai
- INDIA or to an accredited laboratory at least once a year for
calibration.
Returning the calibrator for Service
When returning the calibrator to the manufacturer for
service, please provide complete information about the
problems faced for clear analysis of the problem. The
calibrator should be returned in the original packing.
