O N E Y E A R L I M I T E D W A R R A N T Y
S E R V I C E
F O R Y O U R N A D Y A U D I O P R O D U C T
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at
(510) 652-2411 or e-mail at [email protected]
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you
purchased this product.
Please save this warranty and your original sales receipt and retain with your owner’s manual for future reference.
Nady Systems, Inc. warrants to the original consumer purchaser that the speaker is free from any defects in material or
workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the
warranty period, Nady Systems, Inc. will repair or replace the speaker free of charge, subject to verification of the defect or mal-
function upon return to Nady Systems.
This warranty is subject to the following conditions:
1) This system must have been purchased from an authorized Nady dealer and all warranty service must be performed by
Nady’s service department. Any service not performed by Nady will automatically void this warranty.
2) Items not covered: physical damage resulting from improper handling of the speaker in transit from the factory by the
shipper (Nady Systems is not responsible for such damage and all such claims must be made against the shipping company
by the consignee.); damage caused by applying amplification power to the speaker in excess of its rated power (as indicated
by burnt speaker or horn coils or other components); damage or defects caused by abuse, neglect, accident, failure to
connect or operate the unit in a way that does not comply with applicable technical or safety regulations, or improper repair,
excessive heat or humidity, alteration causing cracks, broken housings or parts, appearance items; items damaged in
shipment to for repair. Warranty is void if Nady serial number has been removed.
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
PPAS-112+ silkscreen
FILENAME: PPAS112plus_silkscreen.ai
COLORS: PMS 187(red), white
AC~ 110V / 60Hz
use 2A 250V fuse only
O P E R AT I O N S
T E C H N I C A L D ATA
1. Inputs - Balanced XLR / Unbalanced RCA
2. Output - Balanced XLR
3. Power / Clip LEDs -
The Power LED will light green
when the unit is turned on. The Clip LED lights red when the
output signal is clipping. If the red LED flashes repeatedly, you
should turn down the volume to avoid audible distortion and
damage to the speaker.
Note: Speakers damaged due to clipping are not covered
under warranty.
4. Volume knob -
Controls the Master Volume
5. AC POWER CORD Connector -
Connects to the
AC power cable. Uses a typical IEC connecting power cable
(included)
6. Fuse Holder -
Fuses may only be replaced by same type
and rating - 2A 250V
7. On/Off Switch -
Turns the unit on and off.
7.
1.
3.
4.
2.
5.
6.
