Nady Systems ENCORE II User Manual Download Page 4

•  Available on selected frequencies in the VHF high band 

  (171-216 MHz) for interference-free, long-range performance

•  Proprietary companding circuitry for an industry-best 120dB Dynamic Range,      

  and the clearest, most natural sound available

•  Operating Range: Up to 250 feet typical (depending on site conditions) – up to  

  500+ feet line- of-sight

•  Noise-free transmitter ON-OFF operation

 

ENCORE II RECEIVER

•  Half-rack receiver design with retractable front panel dual antennas

•  Proprietary DigiTRU Diversity™ digital processing circuitry to eliminate  

 

  dropouts and maximize operating range

•  RF and AF 5-LED displays for monitoring incoming signal strength and 

  audio level

•  Balanced XLR and unbalanced adjustable 1/4” jack outputs

•  Mute (squelch) adjust control

•  Externally powered by AC/DC power adapter

•  Unique snap-out panel locking tabs for single receiver or dual receiver 

  (side-by-side) optional rack mounting

WHT HANDHELD MIC TRANSMITTER

•  Features the Nady DM -10D unidirectional neodymium dynamic cartridge for   

  optimum true sound, maximum feedback rejection and minimal handling noise

•  OFF/STANDBY/ON switch allows convenient audio muting with the

  transmitter “ON”

•  Low battery LED indicator flashes once for unit “ON”; lights steady for 

  low battery alert

•  Rubber, “easy-mount” mic clip included

WGT & WLT BODYPACK TRANSMITTERS

•  Choice of instrument (WGT) or headworn/lavalier microphone (WLT)  

 

  bodypack transmitter

•  OFF/STANDBY/ON switch allows convenient audio muting with the 

  transmitter “ON”

•  Low battery LED indicator flashes once for unit “ON”; lights steady for low  

 

  battery alert

•  Locking 3.5mm mini-jack provides secure connection for removable 

  microphone or instrument cable

•  Easily accessible input level adjust control for optimum sound

LINK 2™ PLUG-IN TRANSMITTER

•  Plug-in transmitter converts your favorite XLR handheld or lavalier microphone   

  to wireless instantly

•  Rugged construction and positive locking connector for reliable performance

•  Selectable phantom power and LO/HI audio input level

•  Optional leatherette pouch with clip available for use as bodypack

SYSTEM FEATURES

4

ENCORE II OVERALL SYSTEM PERFORMANCE

Frequency Response 

25-20,000 Hz, +/-3dB

Dynamic Range 

120dB

Total Harmonic Distortion 

< 0.3%

RF Carrier Frequency Range 

169-216 MHz

Frequency Stability 

+/- 0.005%, crystal controlled

Modulation 

FM (F3E), +/-20KHz max.

Operating Range 

Up to 250 ft. typical (depending on site 

                                            

conditions); up to 500+ feet optimum 

 

line-of-sight

TRANSMITTERS

Audio Inputs                     

  •WHT 

Nady DM-10D neodymium dynamic cartridge

  •WLT/WGT 

3.5mm mono locking jack for connecting to omni  

                                        

or unidirectional lavalier mic or unidirectional    

 

headworn mic, with phantom power (WLT); 

                                           

or connecting to instrument cable (WGT) 

 

LINK 2™ Locking XLR jack for connecting to  

 

 

microphone or cable, with selectable phantom    

 

power

Controls                              

  •WHT 

OFF/STANDBY/ON switch

  •WLT/WGT 

OFF/STANDBY/ON switch, input level adjust

  •LINK 2™            

OFF/STANDBY/ON, LO/HI Level, and ON/OFF  

 

Phantom power switch

LED Indicator  

Unit “ON” (single flash), 

 

Low Battery Alert (steady)

RF Power Out  

50mW (Max. allowed by FCC)

Harmonic & Spurious Emissions 

> –40dB

Battery 

9V Alkaline

Battery Life 

Up to 15 hours

Dimensions                            

  •WHT 

9.5” X 1.4” Diam. (24.1 X 3.5 cm)

  •WLT/WGT 

4.1” X 2.4”X 0.8” (10.4 X 6.1 X 2.0 cm)

  •LINK 2™        

4.5” X  1.5” X 1.25” (11.4 X 3.8 X 3.2 cm)

Weight (w/o battery)                                             

  •WHT 

6.9 oz (193 g)

  •WLT/WGT 

3.6 oz (101 g)

  •LINK 2™            

2.6 oz (71 g)

SPECIFICATIONS

17

Summary of Contents for ENCORE II











Reviews: