Specifications
Transducer Type
Omni-directional electret condenser
Impedance
600 Ohms
Sensitivity
-40dB (0dB = 1V/Pa)
Frequency Response
20Hz-20kHz
Current Consumption
<2mA
Maximum SPL
>120dB
Connector
Gold-plated XLR
Phantom Power
15-48V
Dimensions
Diameter: 0.87” (22.22 mm)
Length: 7.5” (190 mm)
Weight
4 oz (120 g)
Specifications subject to change at any time without prior
notice for purposes of product improvement
USER GUIDE
CM-100
Condenser Measurement Microphone
Precautions and Care
• The microphone should never be dropped or subjected
to extreme shock. Store only in a padded case to protect it
during transport
• Keep the microphone away from extremely high
temperatures (above 140˚F or 60˚C) and humidity and
avoid leaving it in direct sunlight for long periods of time
• When using the microphone outdoors, avoid getting it wet
• After use in a high-moisture application such as a stage
performance, wipe off the microphone with a dry cloth
and allow it to air dry
• Do not store the unit in a closed space (e.g., a plastic bag)
until all moisture has evaporated
Frequency Response / Polar Pattern
Standard Items Supplied
• CM 100 microphone
• Microphone clip
• Foam windscreen
• Instruction manual
Optional Accessories
• SMCC-1 Foam padded plastic carrying case
• SMPS-1 48V phantom power supply
• MST-5B microphone stand
• XC-20 XLR low noise 20 ft. microphone cable
Thank you for choosing the Nady CM-100 ultra linear classic diaphragm electret
condenser microphone. Optimally designed for precise alignment applications
such as room acoustics corrections. Perfect also for many recording uses,
both instruments and vocals.
Features
• True, symmetric omni-directional pattern, high sensitivity,
minimal self-noise, increased dynamic range, high
SPL capability, and extremely smooth, linear 15Hz to
20KHz frequency response provide ultimate precise
measurements and transparent recordings
• Perfect for use with realtime analyzers for precise, accurate
room acoustics alignments
• Especially suited for highly effective, detailed recording of
acoustic guitars and vocals
• Rugged construction, gold-plated XLR, and internal assembly
shockmount for maximum reliability
• Includes foam windscreen for outdoor applications and mic
stand clip (including 5/8” to 3/8” adapter)
