background image

One Year Limited Warranty

Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects 
in material or workmanship for a period of one year from the date of original retail purchase. If any such 
defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of 
charge, subject to verification of the defect or malfunction upon return to Nady Systems. Please do not 
return your Nady product to the store where it was purchased as Nady Systems handles your warranty 
service directly. Communication with our Service Department is the most efficient means of servicing 
your unit and we are dedicated to keeping you a satisfied customer.

To the extent permitted by law, any applicable implied warranties, including warranties of merchantability 
and fitness are hereby limited to one year from the date of purchase. Consequential or incidental 
damages resulting from a breach of any applicable express or implied warranties are hereby excluded. 
This warranty is in lieu of all other agreements and warranties, general or special, express or implied 
and no representative or person including a Nady dealer, agent, or employee is authorized to assume 
for us any other liability in connection with the sale or use of this Nady Systems’ product.

Whereas some states do not allow limitations on how long implied warranties last, and do not allow 
exclusion of incidental or consequential damages, the above limitations and exclusions may not apply 
to you. This warranty gives you specific legal rights and you may also have other rights which may vary 
from state to state.

This warranty is subject to the following conditions:

1) This system must have been purchased from an authorized Nady dealer and all warranty 
service must be performed by Nady’s service department. Any service not performed by Nady 
will automatically void this warranty.

2) Items not covered: physical damage resulting from improper handling of the unit in transit from the 
factory by the shipper (Nady Systems is not responsible for such damage and all such claims must be 
made against the shipping company by the consignee); defects caused by normal wear of the product 
(expendable parts are typically connectors, cables, potentiometers, switches and similar components); 
damage or defects caused by abuse, neglect, accident, failure to connect or operate the unit in any way 
that does not comply with applicable technical or safety regulations, or improper repair, excessive heat 
or humidity, alteration or unreasonable use of the unit, causing cracks, broken cases/housings or parts; 
damage caused by leaking batteries; finish or appearance items; items damaged in shipment en route to 
Nady Systems, Inc. for repair. The warranty is null and void if any Nady serial number has been removed 
or defaced.

How To Obtain Service:

1) If factory service is required, you must contact our Service Department at (510) 652-2411 for a return 
authorization (RA) number. Make sure the RA number is clearly marked on the outside of your package. 
(Please note: if an RA number is not included, our shipping department cannot accept your package.)

2) Send the unit back to Nady Systems, 6701 Shellmound Street, Emeryville, CA, 94608 freight 
pre-paid. You must include proof of date and place of purchase (i.e., photocopy of your bill of sale) and 
a brief description of the unit’s problem(s) or Nady cannot be responsible for repair or replacement. 
Nady Systems, Inc. will not repair, nor be held responsible, for any units returned without proper 
identification, return address, and RA number clearly marked on the package.

3) Per the above, Nady will perform all warranty service and return the unit to you at no charge. 
Nady Systems will inform the buyer if product sent in does not meet the terms of this warranty 
and will provide a quote for fixing the unit and/or shipping it back exclusively at the buyer’s expense.

23

Summary of Contents for 8W-1KU

























Reviews: