background image

5

I N S TA L L AT I O N

To ensure years of enjoyment from your NADY AUDIO SRM Series mixing console, please read and understand this manual
thoroughly before using the unit.

1. INSPECTION

Your NADY AUDIO SRM-12X/14X was carefully packed
at the factory in packaging designed to protect the units
in shipment. Before installing and using your unit, careful-
ly examine the packaging and all contents for any signs
of physical damage that may have occurred in transit.

[Please note: Nady Systems is not responsible for ship-
ping damage.  If your unit is damaged, do not return to
Nady, but notify your dealer and the shipping company (if
shipped to you) immediately to make a claim. Such
claims must be made by the consignee in a timely man-
ner.]

2. RACK MOUNTING

Enclosed in the shipping box you will find a rackmount
kit. If you want to make your SRM-12X/14X a rack mixer,
remove the screws from the side panels and use them to
fix the rack ears (note that there is a left and a right one).  

Parts of the mixer and the power supply unit can become
very warm during use. This is normal during operation.
Care should be taken to ensure that there is enough
space around the unit for cooling. Also, do not place the
SRM-12X/14X on high temperature devices such as
power amplifiers etc. or the unit may overheat in opera-
tion.

Although the unit's chassis is shielded against radio fre-
quency (RF) and electromagnetic interference (EMI),
extremely high fields of RF and EMI should be avoided.

3. POWER CONNECTION

The SRM-12X/14X is designed to operate with the sup-
plied external power supply unit (PSU). Please make sure
that the power unit supplied is marked for the correct volt-
age in your area (120VAC/60 Hz or 230VAC/50Hz).
Power requirements for electrical equipment differ from
area to area. In new installations and portable sound sys-
tems, or any situation in which the AC power is in ques-
tion, it is wise to confirm the voltage and use the appropri-
ate power supply unit before connecting it to power
sources.

Check to see that the unit is set to the voltage for your
area by referring to the table below:

Europe (except UK): 230V, 50Hz

UK and Australia: 240V, 50Hz

USA and Canada: 120V, 60 Hz

For other areas, please check with local authorities.

Do not connect the PSU to the SRM-12X/14X while the
PSU is connected to the AC mains supply. Connect the
switched-off SRM-12X/14X and PSU first before you con-
nect the PSU to the mains supply. Lastly switch on the
SRM-12X/14X with the power switch on the back panel.
Use only the correct NADY power supply unit to connect
the SRM-12X/14X to the Mains AC power.

Summary of Contents for SRM SERIES
















Reviews: