background image

SPECIFICATIONS

1. INPUT SECTION

2. OUTPUT SECTION

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications
for this unit, including design and appearance, are subject to change without prior notice.

13

3. MIXER SECTION

Frequency Response .................................................................................................................................................................... 20Hz~20KHz (

±

3dB)

THD .............................................................................................................................................................................................. 0.07%, 20Hz~20KHz

S/N RATIO ........................................................................................................................................................................................................... -65dB

NOISE FLOOR ................................................................................................................................................................................................... 102uV

HIGH EQ 

±

15dB ................................................................................................................................................................................................. 12KHz

MID EQ 

±

15dB ................................................................................................................................................................................................... 2.5KHz

LOW EQ 

±

15dB .................................................................................................................................................................................................... 80Hz

7-BAND EQ 

±

12dB ................................................................................ 125Hz, 250Hz, 500Hz, 1KHz, 2KHz, 4KHz, 8KHz, 2 x 5-segment VU meter

PHANTOM POWER ............................................................................................................................................................... 48VDC, globally selected

4. POWER AMP SECTION

POWER OUT

    8

 BOTH CHANNELS DRIVEN ............................................................................................................................................................. 200W RMS

    4

 BOTH CHANNELS DRIVEN ............................................................................................................................................................. 300W RMS

    8

 BRIDGED .......................................................................................................................................................................................... 600W RMS

    4

 BRIDGED .......................................................................................................................................................................................... 750W RMS

FREQUENCY RESPONSE .............................................................................................................................................................. 20Hz~20KHz 

±

1%

THD ........................................................................................................................................................................................................................ 0.5%

5. GENERAL

POWER REQUIREMENTS ......................................................................................................... Voltage selectable, 115VAC/60Hz or 230VAC /50Hz

FUSE REQUIREMENTS ............................................................................................................ 12.5A 250V FB @ 115VAC; 6A 250V FB @ 230VAC

WEIGHT ............................................................................................................................ SPM 6600: 43 lbs. (19.5 Kg); SPM 8600: 44 lbs. (19.9 Kg)

DIMENSIONS ..................................................................................................................................... 11.8” x 18.8” x 12” (30.5 cm x 47.7 cm x 30 cm)

Input                                           Connector                              Input Impedance

    Max Level

MONO CH MIC

XLR BALANCED

3.7K 

-10dB (-20dB pad on)

MONO CH LINE

1/4” TRS BALANCED

25K

+19dB (-20dB pad on)

AUX RETURNS

1/4” TS BALANCED

10K

+10dBu

TAPE IN

RCA JACKS

10K

+10dBu

Output                                           Connector                           Output Impedance

    Max Level

MASTER MIX

1/4” UNBALANCED

1K 

+21dB

AUX SEND

1/4” UNBALANCED

1K 

+21dB

MONITOR OUT

1/4” UNBALANCED

1K 

+21dB

TAPE OUT

RCA JACKS

1K 

+21dB

Summary of Contents for SPM 6600
















Reviews: