Nady Audio PRM-400 Owner'S Manual Download Page 13

S P E C I F I C AT I O N S

13

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.

1. POWER OUTPUTS (R.M.S)

200 Watts (35W + 35W) /4

x 2

0.1% (T.H.D) @ 1KHz

2. TOTAL HARMONIC DISTORTION

Main Amp 

0.05% @1KHz

Mic Ch ~ Main Amp 

0.1% @1KHz

3. FREQUENCY RESPONSE

± 3dB, 20Hz ~ 20KHz @ 1W/4

(Speaker Output)

± 3dB, 20Hz ~ 20KHz @ +4dB/10

(Mixer Stereo Output)

4. INPUT LEVEL SENSITIVITY

MIC CH ..........................................................................-60dBv
LINE CH ........................................................................-40dBv
TAPE IN ........................................................................ -40dBv
AUX RETURN .............................................................. -20dBv
EFF SEND  .................................................................. -20dBv
EFF RETURN  .............................................................. -20dBv

5. HUM & NOISE

-80dB ("A" FILTER)

6. REMAINING NOISE

-85dB ("A" FILTER)

7. INPUT CHANNEL EQUALIZATION

MIC, LINE, & PHONO INPUTS:

EQ 

HIGH (Shelving) ......................................10KHz / ±15dB
MID (Bell) ................................................2.5KHz / ±15dB
LOW (Shelving) ..........................................60Hz / ±15dB

8. MASTER MIX EQUALIZATION

7 band (63Hz, 150Hz, 400Hz, 1KHz, 2.5KHz, 6.4KHz,
15KHz) +/-12dB

9. HEADPHONE OUTPUTS

40mW x 2

10. PROTECTION

TURN ON MUTING .................................................... ~ 1 SEC
TURN OFF MUTING ..................................................INSTANT

11. VU METERS

10-segment LED x 2

12. PHANTOM POWER

+48VDC, globally selected

13. POWER REQUIREMENTS

Voltage Selectable ......................115VAC/60Hz, 230VAC/50Hz

14. POWER CONSUMPTION

600W

15. FUSE

115VAC Operation ......................................6A, 5x20mm, 250V
230VAC Operation ......................................3A, 5x20mm, 250V

16. DIMENSIONS (W x H X D)

16” x 17” x 6” (406 x 432 x 152 mm)

17. WEIGHT 

27.8 lbs (12.6 Kg)

Summary of Contents for PRM-400
















Reviews: