background image

3

ATTENTION

RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR 

An equilateral triangle enclosing a lightning flash/arrowhead symbol 
is intended to alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s enclosure which may be of 
sufficient magnitude to constitute a risk of electric shock.

An equilateral triangle enclosing an exclamation point is intended to 
alert the user to the presence of important operating and service 
instructions in the literature enclosed with this unit.

When.using.this.electronic.device,.basic.precautions.should.
always.be.taken,.including.the.following:

Read.all.instructions.before.using.the.product.
Do.not.use.this.product.near.water.(e.g.,.near.a.bathtub,.
washbowl,.kitchen.sink,.in.a.wet.basement,.or.near.a.
swimming.pool,.etc.).
This.product.should.be.used.only.with.a.cart.or.stand.that.
will.keep.it.level.and.stable.and.prevent.wobbling.
This.product,.in.combination.with.headphones.or.speakers,.
may.be.capable.of.producing.sound.levels.that.could.
cause.permanent.hearing.loss..Do.not.operate.for.a.long.
period.of.time.at.a.high.volume.level.or.at.a.level.that.is.
uncomfortable..If.you.experience.any.hearing.loss.or.ringing.
in.the.ears,.you.should.consult.an.audiologist.
The.product.should.be.positioned.so.that.proper.ventilation.is.
maintained.
The.product.should.be.located.away.from.heat.sources.
such.as.radiators,.heat.vents,.or.other.devices.(including.
amplifiers) that produce heat.
The.product.should.be.connected.to.a.power.supply.only.
of.the.type.described.in.the.operating.instructions.or.as.
marked.on.the.product..Replace.the.fuse.only.with.one.of.the.
specified type, size, and correct rating.

1.
.

3.

4.

5.

6.

7.

Warning

Date.of.Purchase.

Dealer’s.Name

City.

.

State.

Zip

Model.#.

.

Serial.#

The.power.supply.cord.should:.

(1)

.be.undamaged,

 () 

never.

share.an.outlet.or.extension.cord.with.other.devices.so.that.
the.outlet’s.or.extension.cord’s.power.rating.is.exceeded,.
and.

(3)

.never.be.left.plugged.into.the.outlet.when.not.being.

used.for.a.long.period.of.time.
Care.should.be.taken.so.that.objects.do.not.fall.into,.and.
liquids.are.not.spilled.through,.the.enclosure’s.openings.
The product should be serviced by qualified service 
personnel.if:

The.power.supply.cord.or.the.plug.has.been.damaged.
Objects.have.fallen.into,.or.liquid.has.been.spilled.onto.
the.product.
The.product.has.been.exposed.to.rain.
The.product.does.not.appear.to.operate.normally.or.
exhibits.a.marked.change.in.performance.
The.product.has.been.dropped,.or.the.enclosure.
damaged.

Do.not.attempt.to.service.the.product.beyond.what.is.
described.in.the.user.maintenance.instructions..All.other.
servicing should be referred to qualified service personnel.

8.

9.

10.

A.
B.

C.
D.

K.

11.

Summary of Contents for HPA-8









Reviews: