2. HIGH-VOLTAGE HOSE
2.2
Connecting the hose to the wall inlet
The hose end cuff must be connected as shown in the picture below. The black part on the end cuff must be well
aligned with the 2 pins inside the inlet
(C)
. The plastic square must be facing up
(D)
.
2.1
Compatibility
The hose is compatible with most wall inlets. Inlets must have a 1.5’’ inner diameter
(A)
in order for the hose to
fit, and must have 2 low-voltage pins/metal prongs
(B)
in order to turn the vacuum ON and OFF from the switch
located on the hose handle.
2.3
Dual switch control
1. Suction activation only: When using floor
brush and accessories
2. Turn the unit off
3. Suction and carpet beater activation
2.4
72’’ pigtail (power cord)
The pigtail must be plugged into a stan-
dard 110-120 V outlet to power the electric
carpet beater. The switch must be set to
level II as demonstrated in step 2.3.
C
A
B
D
1.
2.
3.