1 STANDARD RIBBON CABLE
•
For a complete listening experience on most devices, use the
standard ribbon cable. Plug the straight end of the standard cable
into the bottom of the left or right ear cup and the L-shaped end
into the 1/8” (3.5mm) stereo socket on your music player.
•
Each ear cup is marked with “L” and “R” to indicate the left and right
sides of the headphones.
•
A 1/4" (6.3mm) adaptor is also included for connecting to other
audio equipment.
NOTES
• Grasp the plug at the end of the cable and pull to disconnect. Never
pull on the headphone cable to disconnect the headphones from the
music player.
• Turn the volume down to a comfortable listening level on your music
player before putting on VISO HP50.
2 AIRLINE ADAPTOR
•
Use the supplied dual 3.5mm airline adaptor to connect your VISO
HP50 with in-flight entertainment systems.
NOTES
• Audio output jack configurations may vary on airplanes.
Airline audio may not equal the high quality sound heard from your
home audio equipment, or a portable source.
• NAD Electronics does not recommend using these headphones
as aviation communication equipment as they are not engineered
for many environmental conditions common in commercial
or non-commercial aircrafts (including, but not limited to: altitude,
temperature, noise conditions, unpressurized aircraft, etc.) resulting
in possible interference to critical communications.
3 HEADPHONE ADAPTOR (3.5 mm to ¼ inch)
•
Use this headphone adaptor to connect your 1/8 inch (3.5mm)
stereo plug to a 1/4 inch (6.3mm) stereo jack.
4 INLINE MICROPHONE/REMOTE CABLE
•
VISO HP50 includes an inline microphone and remote cable for use
with iPod and other iOS devices. The cable is equipped with a call
answer button and other phone features for effortless switching
between music listening and talking. It also features music and
video playback control for iPod®, iPhone® and iPad®.
•
Audio is supported on all iPod models. The remote is supported by
iPod Shuffle (3rd generation and later).
•
The remote and microphone are supported only by
• iPod nano (4th generation and later)
• iPod Classic (120GB, 160GB)
• iPod Touch (2nd generation and later)
• iPhone 3S, iPhone 4, iPhone 5, iPad and iPad mini
•
Plug the end of the remote cable that is closest to the control
button into the bottom of the left or right ear cup and the L-shaped
end into the 1/8” (3.5mm) stereo socket on your music player.
IDENTIFICATION OF PARTS AND ACCESSORIES
4
ENGLISH
POR
TUGUÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ