MUTING THE SOUND
Use the HTR 7’s “MUTE” key to silence all channels completely (“Mute” is
displayed in the lower line of the VFD). Muting is always available regardless
of the source or listening mode selections.
NOTE
Adjusting the master-volume via the HTR 7 or the front-panel knob
automatically releases the mute function.
ADJUSTING CHANNEL LEVELS “ON THE FLY”
You can make changes to the relative levels of center, surround and
subwoofer outputs without having to go into the “Channel Levels” menu.
This is very convenient in circumstances like increasing (or tone down)
a film’s dialog level by rising (lowering) the center channel or reducing
excessive deep bass (or enhance deep bass) by lowering (rising) the
subwoofer level.
Use the HTR 7’s [SURR], [CENT] and [SUB] keys for direct-access level
adjustment of these channels over a range of ±12dB.
The [SURR] button will adjust first Surround Left (SL) channel level. To adjust
Surround Right channel level, press and release [SURR] button, the VFD will
show “SL” and the current Surround Left channel level. Wait for the display
to “SR” and the current surround right channel level. You can now to set
your preferred Surround Right channel level by pressing [SURR] key.
NOTE
The lower line of the VFD will display the channel being adjusted and the
corresponding level setting.
ADJUSTING THE TONE CONTROLS
The VISO FIVE bass and treble controls are adjusted using the front panel’s
[TONE] button in conjunction with the VOLUME knob. The corresponding
[TONE] and [VOL
] keys of HTR 7 can also perform the same functions.
Referring to the lower line of the VFD, toggle [TONE] button to select “Bass”,
“Treble”, “Tone Active” or “Tone Defeat”. While at either Bass or Treble mode,
rotate VOLUME knob clockwise or counterclockwise to adjust the Bass or Treble
level within the range ±12dB.
Bass and treble settings affect only the front left/right channels, and are
active in all SURROUND MODES.
Select “Tone Defeat” to bypass the Tone Controls effectively defeating
the effect of the tone control circuits. If “Tone Active” is selected, the Tone
Control circuits are active.
FACTORY DEFAULT SETTINGS
Sometimes power spikes and drop-outs may from time to time cause some
inadvertent functionality. The procedure below will set the VISO FIVE to
factory default settings
1
Place the VISO FIVE into AM mode.
2
Press quickly the three front panel buttons: [PLAY/PAUSE], [STOP] then
[DISPLAY], holding the “DISPLAY” button for more than 7 seconds. The
VISO FIVE will switch itself off, then back ON to DVD mode.
Please note that setting the VISO FIVE to factory default will delete all AM,
FM and DAB presets. It will also reset all your timer settings.
SETUP
SETTING UP THE VISO FIVE
13
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
Р
У
С
СКИЙ
