background image

ENGLISH

6

1  BALANCED    

• 

Use the BALANCED analog audio input of the M28 if the external 
source to be connected has BALANCED audio output.  Superior 
audio quality is ensured with the distinctive noise reduction 
capability of BALANCED connection with XLR jacks. 

• 

With BALANCED as the selected audio input, ensure that SELECT 
switch is set to BALANCED. 

• 

For optimum heat dissipation in an AV surround system, the 
following audio channel allocations are recommended: 
Channel 1 = Front Left speaker
Channel 2 = Surround Left speaker
Channel 3 = Surround Back Left speaker
Channel 4 = Center speaker
Channel 5 = Surround Back Right speaker 
Channel 6 = Surround Right speaker
Channel 7 = Front Right speaker

PIN CONFIGURATION OF BALANCED XLR JACK

Pin 1: Ground
Pin 2: Positive (signal live) 
Pin 3: Negative (signal return)

IMPORTANT NOTES

•  Always turn OFF the M28 and other components in the system before 

connecting or disconnecting anything to the BALANCED audio input 
jacks. 

•  Before switching ON the M28 from standby mode for the first time, 

make sure that the volume control of the external source is set to 
minimum level position. This prevents inadvertently beginning a session 
at excessive volume.  

·  Depending upon the source’s configuration, analog audio input 

connection can be made up to seven channels either via BALANCED or 
SINGLE-ENDED input ports. 

2 SINGLE-ENDED

• 

Use single-ended analog audio input for sources (preamplifiers or 
processors) that are not equipped with BALANCED analog audio 
output. 

• 

With SINGLE-ENDED as the selected audio input, ensure that 
SELECT switch is set to SINGLE-ENDED. 

3 PROTECT 

• 

When a specific channel goes to protect mode, the corresponding 
PROTECT LED will turn red.  The other amplifiers that did not go 
to protect mode will continue to function as indicated by their 
respective PROTECT LEDs illuminated in green.

PROTECT LED INDICATOR COLORS 

CONDITION

PROTECT LED COLOR

POWER INDICATOR (NAD 

LOGO) COLOR

Normal operation

Green

Bright/white

Overheat

Red (per applicable channels; 

other channels may remain 

green)

Bright/white

Short circuit

No light (all channels)

Red

IDENTIFICATION OF CONTROLS

REAR PANEL

© NAD  M28

SELECT

BALANCED

SINGLE-ENDED

PROTECT

ANALOG AUDIO INPUT

SELECT

BALANCED

SINGLE-ENDED

PROTECT

ANALOG AUDIO INPUT

SELECT

BALANCED

SINGLE-ENDED

PROTECT

ANALOG AUDIO INPUT

SELECT

BALANCED

SINGLE-ENDED

PROTECT

ANALOG AUDIO INPUT

SELECT

BALANCED

SINGLE-ENDED

PROTECT

ANALOG AUDIO INPUT

SELECT

BALANCED

SINGLE-ENDED

PROTECT

ANALOG AUDIO INPUT

SELECT

BALANCED

SINGLE-ENDED

PROTECT

ANALOG AUDIO INPUT

POWER

ON

SPEAKER

SPEAKER

SPEAKER

SPEAKER

SPEAKER

SPEAKER

SPEAKER

4

5

6

7

8

9

10

1

2

3

ATTENTION! 

 

Ensure that the M28 is unplugged before making any connections. It is also advisable to power-down or unplug all associated components while making 
or breaking any signal or AC power connections.

Summary of Contents for M28











Reviews: