14
ENG
PROGRAMMING THE REMOTE CONTROL
10
Continue to program other components by repeating from Step 5.
11
Once you have completed programming all the devices, exit from the programming
mode by pressing both the MAIN and PAGE buttons simultaneously.
12
You will be in the setting mode. Move the cursor to
8. TO EXIT
and press the joystick
down or simply press the MAIN button to exit to the main menu.
LEARNING METHOD
You can also teach any of the buttons in the remote control except the MAIN and PAGE
buttons with the following steps:
1
Go to the program setting mode by pressing both the MAIN and PAGE buttons
simultaneously for five seconds.
2
Move the cursor to
4. LEARNING
with the joystick and then push the joystick down to
enter the learning mode.
3
If you wish to teach any of the functional buttons in the device, keep the cursor to
COMMON BUTTON and select the device that you wish to enter. If you wish to teach
the twelve device buttons shown on the LCD, press the MUTE button to move the
cursor to the DEVICE BUTTON and select the device on the LCD that you wish to teach.
