background image

IDENTIFICATION OF CONTROLS

rear panel

1  upgrade port:

 For future software program updates, use this port 

to upgrade the C 545BEE.  Owners who register their C 545BEE in our 
international website 

www.nadelectronics.com

 will be advised of 

updates (if any). Your custom installer or dealer can assist you in the 
proper upgrade and setup of your C 545BEE.

2  line out:

 Connect to the corresponding analog audio input of an 

amplifier, receiver or stereo system. 

3  digital out (coaxial, optical):

  The digital playback audio 

output signal is available at these ports. Connect the optical or coaxial 
digital OUT ports to the corresponding S/PDIF digital input of an 
amplifier, receiver, computer soundcard or other digital processors.

4  +12v trigger input:

 The +12V Trigger input allows the C 545BEE 

to be switched remotely from standby mode to ON and vice-versa 
by ancillary equipment such as a preamplifier, AV processor, etc. The 
controlling device must be equipped with a 12V trigger output to use 
this feature.

5  ir input:

 This input is connected to the output of an IR (infrared) 

repeater (Xantech or similar) or the IR output of another component to 
allow control of the C 545BEE from a remote location.

6  ac mainS input:

 The C 545BEE comes supplied with a separate AC 

Mains cable.  Before connecting the cable to a live wall socket ensure 
that it is firmly connected to the C 545BEE’s AC Mains input socket first. 
Always disconnect the AC Mains cable plug from the live wall socket 
first, before disconnecting the cable from the C 545BEE’s Mains input 
socket.

ATTENTION!

 

Please make all the connections to your C 545BEE with the unit unplugged.  It is also advisable to power down or unplug all associated components while 
making or breaking any signal or AC power connections.

1

2

3

4

5

6

9

EN

G

LI

SH

FR

ANÇ

AIS

ESP

AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ

Summary of Contents for C545BEE















Reviews: