background image

PP375

Moving Coil

Moving Magnet

Input Sensitivity

1.6mV

18mV

Input Overload

>4mV (20Hz – 20kHz)

>40mV (20Hz – 20kHz)

RIAA Accuracy

+/- 0.25dB

+/- 0.25dB

Total Harmonic Distortion

<0.03% (20Hz – 20kHz)

<0.03% (20Hz – 20kHz)

IHF A Signal to Noise

>76dB (100 Ohms load)

>77dB (IHF cartridge load)

Channel Separation                    1kHz

>80dB

>80dB

10 kHz

>70dB

>70dB

Specifications 

The  PP  375  is  a  simple  dealer-installed  module  that  integrates  a  very  high  performance  phono  input  with  our  top  
Classic Series Integrated Amps, the C 375BEE and C 356BEE. This high performance phono stage supports both low 
and high output moving coil cartridges, as well as the broad selection of moving magnet and moving iron cartridges on 
the market today. 

> Fantastic Vinyl Playback

An  extremely  accurate  RIAA  filter  (required  for  LP 
playback)  with  excellent  sensitivity,  high  overload 
margins and extremely low levels of noise and distortion, 
extract every nuance of sound from your LPs. 

> MDC Modular Design Construction

This  MDC  upgrade  module  represents  our  belief  that 
customers  should  be  able  to  easily  add  new  features 
in  the  future  without  replacing  the  entire  component.  
MDC not only reduces cost, but also the impact on the 
environment.

>Award-winning Design

The  PP  375  circuit,  designed  by  Director  of Advanced 
Development, Bjorn Erik Edvardsen, is based on many 
award-winning preamp designs. MDC also received the 
prestigious RedDot Design Award in 2009. 

> Seamless Integration 

Unlike other external phono preamps, the PP 375 does 
not  need  extra  wires,  power  supplies  or  interconnect 
cables.  Automatically  assigned  to  the  DISC  input 
selection on the MDC amp, the level is well matched to 
other line level inputs.

PP 375 Phono Preamplifier MDC Module

Features

NAD  Electronics  International  reserves  the  right  to  change  specifications  or  features  without  notice.  NAD  is  a  registered  trademark  of  NAD  Electronics

International.  All  rights  reserved.  No  part  of  this  publication  may  be  reproduced,  stored,  or  transmitted  in  any  form  whatsoever  without  the  written

permission of NAD Electronics International. © 01/11 11-001 NAD Electronics International.

www.NADelectronics.com

Summary of Contents for C375BEE





















Reviews: