NAD C165BEE Specifications Download Page 3

C 165BEE Stereo Preamplifier  

NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics

International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written

permission of NAD Electronics International. © 10/08 NAD Electronics International.

www.NADelectronics.com

>   S P E C I F I C A T I O N S

Over All Specifications

Line Level Input

Input impedance (R and C)  

100 kΩ+ 320 pF

Input sensitivity   

159 mV (ref. 500 mV out)

Maximum input signal  

>9 V

Signal/Noise ratio, A-weighted   >108 dB (ref. 500 mV in 500 mV out, 
 

volume set to unity gain)

 

>112 dB (ref. 2V out, Volume maximum)

Frequency response   

± 0.1 dB (ref. 20 Hz - 20 kHz, Tone defeat ON)

 

± 0.5 dB (ref. 20 Hz - 20 kHz, Tone defeat OFF)

Frequency response 

 

(subwoofer out) 

100 Hz (ref. -3 dB)

Output 

Output impedance 
Pre out 

75 Ω

Tape out 

Source Z + 1 kHz

Sub out 

100 Ω

Headphones 

10 Ω

Maximum voltage output 

Pre out 

>10 V into 600 Ω

Tape out 

>10 V into 10 kΩ load

Sub out 

>7 V into 1 kΩ load

Headphones 

>7 V into 600 Ω

 

>2 V into 32 Ω

 

THD (CCIF IMD, DIM 100) 

>0.005 % dB (ref. 20 Hz – 20 kHz, 2 Vout)

Tone Controls

Treble  

± 5 dB at 10 kHz (ref. 2V in 500 mV out)

Bass  

± 5 dB at 100 Hz (ref. 2V in 500 mV out)

Power Consumption

Normal operation  

21 W   

Standby mode 

<0.8 W

Phono Input

Input impedance      

MC  

40,100,600 Ω (R)

 

1 nF (C)

                                MM  

47 kΩ (R)

 

220,300,400 pF (C)

Input sensitivity        

MC 

0.15 mV (ref. 1 kHz 500 mV out)

                                MM 

2.6 mV   (ref. 1 kHz 500 mV out)

Input overload         MC 

0.8 mV/7 mV/65 mV  

(20 Hz/1 kHz/20 kHz)

                                MM 

14 mV/140 mV/1.2    (20 Hz/1 kHz/20 kHz)

Gain     MC in - Tape out 

62.4 dB1 (ref. 1 kHz, 10 kΩ load)

            MM in - Tape out   

36.7 dB   (ref. 1 kHz, 10 kΩ load)

THD (CCIF IMD, DIM 100) 

<0.009 % (ref. 20 Hz – 20 kHz, 5 Vrms Tape out)

 

 

Signal/Noise ratio, 

IHF A-weighted       MC  

>78 dB2 (ref. 0.5 mV)

                                MM  

>78 dB3 (ref. 0.5 mV)

RIAA response accuracy 

± 0.5 dB (ref. 20 Hz – 50 Hz)

 

± 0.3 dB (ref. 50 Hz – 20 kHz)

Infrasonic filter  

10 Hz (at -3 dB)

 

5 Hz   (at -14 dB)

Physical Specifications

Dimensions (W x H x D)  

Net 

435 x 80 x 286 mm

 

   

17 1/8” x 3” x 11 1/4”   

 

 

Gross 

435 x 99 x 315 mm 

 

 

 

   

17 1/8” x 3 15/16” x 12 1/2” 

  

 

Net weight    13.23 lb (6 kg)

 
 

Shipping  

 

weight 

 17.1 lb (7.8 kg)

 * Gross dimensions include volume knob / speaker ternimals / connectors / feet. 

Note: Installers should allow a minimum clearance of 2- 4 inches for 

 

wire managment. 

Reviews: