condition
poSSible cauSeS
poSSible SolutionS
No sound.
Power AC lead unplugged or power not
switched ON.
•
Check if AC lead is plugged in and power
switched ON.
•
Tape Monitor selected.
•
De-select Tape Monitor mode.
•
Mute on.
•
Switch off Mute.
•
No sound one channel.
Balance control not centered.
•
Center Balance control.
•
RCA lead to power amplifier not properly
connected or damaged.
•
Check leads and connections.
•
Input lead disconnected or damaged.
•
Check leads and connections.
•
No sound from Subwoofer.
Subwoofer is off, not powered or improperly
connected.
•
Power-up subwoofer, check subwoofer’s AC
outlet or check connections.
•
Remote control handset not working.
Battery flat or incorrectly inserted.
•
Check or replace battery.
•
IR transmitter or receiver windows obstructed.
•
Remove obstruction.
•
IR receiver in direct sun or very bright ambient
light.
•
Place unit away from direct sun, reduce
amount of ambient light.
•
PHONO section problems only.
No signal.
•
Check if MC-MM switch is set to the correct
input.
•
Hum on phono input.
•
Check if phono earth lead is connected to
the PHONO GROUND connector.
•
Weak or distorted signal.
•
Check if the turntable is connected to the
correct C 165BEE MM or MC phono input.
•
REFERENCE
troubleShooting
1
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й