8
REMOTE CONTROL FUNCTIONS
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ESP
AÑOL
IT
ALIANO
POR
TUGUÊS
SVENSKA
Introduction
1 Standby/Power
On
: Press this button to turn on the C445 Tuner;
press it again to turn the unit to standby. Note that the Power
Indicator next to the switch will turn green when the unit is on.
2 Numeric
Keys
: These buttons serve as a ten-button numeric keypad
to enter tuner preset positions or to tuned stations directly.
3 Clear
Button
: Press this button to clear presets from your station
list.
4 Info
Button
: Pressing this button will change the content of the
lower display line of the Information Display.
5 Auto Tune Button
: In DAB mode, press this button to automatically
scan all available local stations. To scan for all available stations, keep
the button pressed for three seconds, until AUTO SCAN FULL is
shown in the Information Display.
6 Scroll / Tune Buttons
: Press
to tune lower frequency stations
and
to tune higher frequency stations. When a station with a
strong signal is tuned, the Information Display will read TUNED. Press
again briefly to tune to the next frequency increment in Manual tune
Mode, or keep pressed for automatic search for the next station with
a signal strong enough for acceptable reception in Auto tune Mode.
These buttons also control the parameters in the different menus,
like the Control Ring on the front panel.
7 Preset
Buttons
: Press
or
to select the preset memories
for DAB, FM and AM stations stored in the C445 memories.
8 Menu/FM Mute Selector
: In DAB mode, pressing this button will
activate station order, signal error rate, preset tune, software version,
Dynamic Rate Control or manual tune features. In FM mode, press
this button to select the stereo or mono mode for FM tuning. In the
stereo mode, the word STEREO will be shown in the Information
Display, and stereo reception will be provided when stations are
transmitting stereo signals. In the mono mode, the left and right
signals from stereo broadcasts will be mixed together and
reproduced through all channels. Select MONO for better reception
of weak signals.
9 Band
Selector
: Press this button to change between the DAB, FM
and AM frequency bands.
10 Select
: In FM or AM mode, press this button to select Auto tune,
Manual tune or Preset tune.
11 Memory Button
: Press this button to open the memory position
that stores a preset Band Selector location in the tuner. 99 DAB
presets can be stored, as well as 30 FM and 30 AM presets.
(See page 12 for more information on tuner Auto Tuning Button and
Memory Button sets.)
1
7
6
5
2
11
3
9
4
8
10
C445_eng_v03.qxd 2/24/2006 9:15 AM Page 8
