FM TUNER SECTION
Usable Sensitivity (98MHz)
Signal/Noise Ratio
Frequency Response
Channel Separation (60dBμ)
30Hz
1kHz
10kHz
Capture Ratio (40dBμ)
AM Suppression
Image Rejection (119.4 MHz)
IF Rejection (10.7 MHz)
Pilot Suppression (60dBμ)
Total Harmonic Distortion*
Mono
Stereo
Auto Search (Sensitivity On)
Auto Search (Sensitivity Off)
RDS Decode Sensitivity
AM TUNER SECTION
Usable Sensitivity (999/1000kHz)
Signal/Noise Ratio (5mV in)
Total Harmonic distortion (5mV in)
IF Rejection (450kHz)
Image rejection (F+2xIF)
Selectivity
Loop Sensitivity (20dB S/N)
999/1000kHz
603/600kHz
1404/1400kHz
GENERAL
Standby Power Consumption
Unit Dimension (W x H x D) Gross**
Net Weight
Shipping Weight
C 426
15dBμ
72dB (60dBμ IHF-WTD Mono)
66dB (60dBμ IHF-WTD Stereo)
±1.0dB (20Hz-15kHz, 60dBμ)
>33dB
>42dB
>32dB
3dB
65dB (60dBμ, 100% Mod. FM, 30% Mod. AM)
>85dB
78dB
60dB
0.25%
0.35%
24dBμ
15dBμ
26dBμ
30dBμV
38dB
3%
36dB
28dB
17dB
66dB
66dB
66dB
<0.5W
435 x 86.28 x 311.5mm
4.2kg
5.3kg
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics
International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written
permission of NAD Electronics International. © 06/10 NAD Electronics International.
www.NADelectronics.com
* 60dBμ, L=R 75kHz for 120 version; 40kHz Dev for 230V version
**Gross dimensions include feet, buttons and rear panel terminals.
Note: Installers should allow a minimum clearance of 55mm for wire/cable management.
Specifications
Total Depth 311.5mm
Total Height 86.28mm
Total Width 435mm
Total Depth 311.5mm
Total Height
86.28mm
FM/AM Tuner C 426