3
BluOS PLAYBACK CONTROLS (applicable to NAD products with installed MDC BluOS or MDC2
BluOS D module)
Select
BLS
among the DEVICE SELECTOR buttons to use the following control
buttons for BluOS playback.
IMPORTANT
Ensure that your applicable NAD product is set to BluOS source.
u
:
Start playback; toggle to start or pause playback
j
:
Pause playback temporarily
9
:
Skip back to the beginning of current song
:
:
Skip forward to the next song
ADDENDUM SHEET FOR C 399
USING SR 10 WITH C 399
AUX PLAYER CONTROL (applicable to most NAD Tuners):
Select
AUX
among the DEVICE SELECTOR
buttons to gain access to the following applicable control buttons. The AUX device is defaulted to NAD
Tuner device remote control codes.
SOURCE [
D/F
]:
Step up or down between AM or FM frequencies
D/F
:
Step up or down between stored radio presets
A/S
:
Step up or down between AM or FM frequencies
ENTER:
In AM/FM mode, toggle to select Preset or Tune mode. In DAB mode, press and hold to check
signal strength.
NUMERIC BUTTONS (1-9, 0):
Use the numeric buttons to directly key-in frequency number of desired
AM or FM station
INFO:
Toggle to display supplied information about the current radio station and applicable media
being played. Some radio stations may not support any display information.
u
:
Toggle to select AM, FM, DAB or XM band (if applicable)
9/ :
:
Step up or down between stored radio presets
USING THE SR 10 REMOTE CONTROL LIBRARY
The SR 10 can store a different library of default NAD codes for each of its DEVICE SELECTOR “pages.”
If the original default library does not control your NAD CD player, BluOS player or Tuner, follow the
procedure below to change the library code. Refer also to the table below for a list of applicable NAD
Library Codes with their corresponding NAD models.
LOAD ANOTHER LIBRARY CODE
Example:
Load NAD DVD Player T 517 library codes to SR 10’s
AUX
device.
1
Press and hold
AUX
in the DEVICE SELECTOR section of SR 10.
2
While holding down the device button AUX, press
2
and
2
using SR 10’s numeric buttons.
22
is the
corresponding library code for T 517.
3
Press
ENTER
while still holding down
AUX
device button. The
AUX
device selector will flash once
to indicate that the library input is successful. Both
AUX
device selector and
ENTER
buttons can
now be released.
