PREAMPLIFIER SECTION
LINE IN, SUBWOOFER OUT
THD (20 Hz – 20 kHz)
<0.005 % at 2 V out
Signal-to-Noise Ratio
>106 dB(IHF; A-weighted, ref. 500 mV
out, unity gain)
Input impedance (R and C)
56 kohms + 100 pF
Maximum input signal
>4.5 Vrms (ref. 0.1 % THD)
Output impedance
Source Z + 200 ohm
Input sensitivity
50 mV (100Hz ref. 500 mV out, Volume
maximum)
Maximum voltage output -IHF load
>4.5 V (ref. 0.1 % THD)
LINE INPUT, HEADPHONE OUT
THD (20 Hz – 20 kHz)
<0.005 % at 1V out
Signal-to-Noise Ratio
>105 dB (32 ohms loads; A-WTD, ref. 2V
out, unity gain
Frequency response
±0.3 dB (20 Hz - 20 kHz)
Channel separation
>56 dB at 1kHz
Output impedance
0.5 ohm
GENERAL SPECIFICATIONS
LINE IN, SPEAKER OUT
Continuous output power into 8 ohms
and 4 ohms
50W (ref. 20 Hz-20 kHz at rated THD, both
channels driven)
THD (20 Hz – 20 kHz)
<0.03 % (250 mW to 50W, 8 ohms and
4 ohms)
Signal-to-Noise Ratio
>98 dB (A-weighted,
500 mV input, ref. 1 W out in 8 ohms)
Clipping power
>60 W (at 1 kHz 0.1 % THD)
IHF dynamic power
8 ohms: 80 W
4 ohms: 150 W
2 ohms: 210 W
Peak output current
>18 A (in 1 ohm, 1 ms)
Damping factor
>300 (ref. 8 ohms, 20Hz to 6.5kHz)
Frequency response
±0.3 dB (20 Hz - 20 kHz)
Channel separation
>75 dB (1 kHz)
>65 dB (10 kHz)
Input sensitivity (for 50 W in 8 ohms)
Line In: 380 mV
Digital In: 18% FS
Supports bit rate/sample rate
up to 24 bit/192 kHz
Standby power
<0.5 W
PHONO IN, SPEAKER OUT
THD (20 Hz – 20 kHz)
<0.03 % at 50 W out
Signal-to-Noise Ratio
>82 dB (200 ohms source, A-weighted,
ref. 500 mV out)
>76 dB (MM cartridge source, IHF
A-weighted, ref. 500 mV out)
Input sensitivity
4.1 mV (ref 50 W 1 kHz 4 ohms out,
volume maximum)
Frequency response
±0.3 dB (20 Hz - 20 kHz)
Input impedance (R and C)
47 kohms + 100 pF
Maximum input signal at 1kHz
>80 mVrms (ref. 0.1 % THD)
DIMENSION AND WEIGHT
Gross dimensions (W x H x D)
435 x 70 x 285 mm
17 ¹/8 x 2 ¹³/16 x 11 ¹/4 inches
Shipping weight
5.85 kg (12.90 lbs)
* - Gross dimension includes feet, volume knob and extended rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features, please
check out www.NADelectronics.com for the latest information about C 338.
REFERENCE
SPECIFICATIONS
All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter.
15
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
