NAD C 275BEE Owner'S Manual Download Page 3

19  Damage Requiring Service 

- Unplug this product from the wall 

outlet and refer servicing to qualified service personnel under the 
following conditions:

a) 

When the power-supply cord or plug is damaged.

b) 

If liquid has been spilled, or objects have fallen into the product.

c) 

If the product has been exposed to rain or water.

d) 

If the product does not operate normally by following the 
operating instructions. Adjust only those controls that are covered 
by the operating instructions as an improper adjustment of other 
controls may result in damage and will often require extensive 
work by a qualified technician to restore the product to its normal 
operation.

e) 

If the product has been dropped or damaged in any way.

f) 

when the product exhibits a distinct change in performance-this 
indicates a need for service.

20 Replacement Parts 

- When replacement parts are required, be 

sure the service technician has used replacement parts specified 
by the manufacturer or have the same characteristics as the 
original part. Unauthorized substitutions may result in fire, electric 
shock, or other hazards.

21  Safety Check 

- Upon completion of any service or repairs to this 

product, ask the service technician to perform safety checks to 
determine that the product is in proper operating condition.

22  Wall or Ceiling Mounting 

- The product should be mounted to a wall 

or ceiling only as recommended by the manufacturer.

23 Heat 

- The product should be situated away from heat sources such as 

radiators, heat registers, stoves or other products (including amplifiers) 
that produce heat.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
PRODUCT TO RAIN OR MOISTURE.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE 
SLOT, FULLY INSERT.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN 
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER 
TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” 
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF 
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC 
SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS 
INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT 
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE 
LITERATURE ACCOMPANYING THE APPLIANCE.

The equipment draws its nominal non-operational power from the AC 
outlet with its POWER switch in the STANDBY position. 
The socket-outlet shall be installed near the apparatus and shall be easily 
accessible.

CAUTION

Changes or modifications to this equipment not expressly approved by 
NAD Electronics for compliance could void the user’s authority to operate 
this equipment.

CAUTION REGARDING PLACEMENT

To maintain proper ventilation, be sure to leave a space around the unit 
(from the largest outer dimensions including projections) that is equal to or 
greater than shown below.

 

Left and Right Panels: 10 cm

 

Rear Panel: 10 cm

 

Top Panel: 50 cm

IMPORTANT SAFETY INSTRUCTIONS

 

 

3

ENGLISH

FR

ANÇ

AIS

ESP

AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ

Summary of Contents for C 275BEE













Reviews: