233969 / 01/13 (A20)
8
Quick Set-Up Guide
PlEASE REAd bEFORE COMMENCING ANy OPERAtION.
After the removal of all the packaging, carefully open and check the contents.
Ensure the Batteries are charged before use.
!
!
1
2
Using the handle position lever, move the handle into the
upright position. (Fig 1).
Fit the Brush / Pad (Fig 2).
Swing the floor-tool carrier from behind the brush. (Fig 3).
Fit the battery to the machine (Fig 5) and plug in the power
supply. (Fig 5a). Ensure the battery has been charged before
use.
4
3
5
Using the two locking knobs fitted to the floor-tool, secure to
the floor-tool to the floor-tool carrier. (Fig 4).
Fill the clean-water to a Max of 18 litres
(see page 10)
For operation and cleaning
controls (see page 14)
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
Fig 5a
