Nacecare TP4X Owner'S Manual Download Page 4

Page: 4 / 5

2. Connect the vacuum hose to the machine as shown in Fig 1 (TP12QX and TP18SX have the connections

in the rear of the machine).

3. Connect the solution hose to the machine as shown in Fig 2

4. Connect the wand/hand tool to the end of the hose as shown in Fig 3

Fig 1

Fig 2

Fig 3

5. Plug the machine into the wall socket (see safety regulations).

6. Switch the water pump and vacuum motor on.

Now the machine is ready to operate.

Attention

Do not

use the machine as a dry vacuum cleaner!

Do not

let the pump run dry!

Summary of Contents for TP4X

Page 1: ...TO USING THIS MACHINE MAKE SURE THAT YOU HAVE READ AND UNDERSTAND THE SAFETY AND OPERATING INSTRUCTIONS FOR THIS MACHINE NaceCare Solutions 1205 Britannia Road East Mississauga Ontario Canada L4W 1C7 Toll Free 1 800 387 3210 Toll Free Fax 1 800 709 2896 ...

Page 3: ...lution tank with cold or warm water through the filling hole Add non foaming chemical to the solution tank diluting it according to the manufacturers specifications Attention wool carpet must be washed with cold water only 1 Reconnect the upper tank to the lower tank and fasten the springs TP4X and TP8X only ...

Page 4: ...se to the machine as shown in Fig 2 4 Connect the wand hand tool to the end of the hose as shown in Fig 3 Fig 1 Fig 2 Fig 3 5 Plug the machine into the wall socket see safety regulations 6 Switch the water pump and vacuum motor on Now the machine is ready to operate Attention Do not use the machine as a dry vacuum cleaner Do not let the pump run dry ...