background image

Page  -2-

                                 

N.A.C.E.

 

Operator's Manual - 

DM1400 & DM1800

Operator Safety Instructions ............................................................................................................. 3

Introduction & Machine Specifications .............................................................................................  7

Grounding Instructions .................................................................................................................... 8

How To Assemble The Machine ....................................................................................................... 9

The Controls ..................................................................................................................................... 12

How To Operate The Machine .......................................................................................................... 14

Maintenance .................................................................................................................................... 15

How To Change The Filter Bag ............................................................................................ 15

How To Clean The Filter Cartridge ....................................................................................... 16

How To Replace The Brush ................................................................................................. 16

How To Change The Drive Belt ............................................................................................ 17

The Vacuum Indicator Light ................................................................................................. 17

The Circuit Breaker .............................................................................................................. 17

Brush Performance Indicator Lights .................................................................................................. 18

SECTION II Parts and Service Manual

Drawing #1 Upper Canister Assembly .............................................................................................. 20

Parts List #1 Upper Canister Assembly ............................................................................................ 21

Drawing #2 Brush Housing Assembly ............................................................................................... 22

Parts List #2 Brush Housing Assembly ............................................................................................ 23

Parts List #3 Hose Wand and Handle Assembly .............................................................................. 24

Table of Contents

Summary of Contents for DM1400



























Reviews: