8
PRO-18 USER MANUAL
REV A
CHAPTER 5
BACK PANEL
1.
RVRB:
a.
External on/off foot switch for reverb.
b.
Normally enabled and controlled via the Front Panel Reverb control.
c.
Foot switch is not included.
d.
Recommend item P-H477 from Antique Electronic Supply
2.
BOOST:
a.
External on/off foot switch controls pre-amp level to boost from
rhythm to lead.
b.
Levels can be set up via the gain and/or V-power* controls.
c.
Normally enabled for lead.
d.
Foot switch is not included.
e.
Recommend item P-H477 from Antique Electronic Supply
3.
RECORD:
a.
A line out from the pre-amp to facilitate recording sessions and
other functions. Use a ¼ inch stereo plug for balanced output and a ¼
inch mono plug for single ended output.
b.
Emulates the SPL of a Celestion Greenback.
c.
Use a high quality guitar cable or mic cable for best results.
d.
Turn the Mater Volume fully counter clockwise when using.
e.
Cable is not included.
4.
FX SEND/FX RETURN:
a.
Output from pre-amp (no internal reverb) to facilitate the use of
external audio processors including foot pedals.
b.
FX SEND may be used as a pre-amp output to other amplifiers.
c.
FX RETURN may be used as an input from other amplifiers.
