Chapter 4
Preparations for installation
13
4.2.6. Lubricant
For products in which the lubricant is filled
• The lubricant described in the “Outer dimensions” drawings is filled before shipping. If there is no
indication in the “Outer dimensions” drawings, contact our service representative.
For products in which the lubricant is not filled
• Be sure to prepare the Nabtesco-specified lubricant. For purchase of the lubricant, contact our service
representative.
• Do not mix it with other lubricants.
Table 4-3
Brand specified by Nabtesco
VIGOGREASE* RE0
Operating temperature range
(ambient temperature)
-10 to 40°C
* VIGOGREASE is registered trademark of Nabtesco Corporation.
In order to take advantage of the performance of this product, use the Nabtesco-specified lubricant.
Using other types of lubricant could cause deterioration of performance and premature damage.
Mixing with other lubricants could cause deterioration of performance, generation of abnormal noise,
and premature damage.
4.2.7. Plug for tapped hole for injecting/draining grease
Prepare plugs for tapped holes for injecting/draining grease used for the motor mounting flange and shaft
installation component. Also prepare seal tapes and other necessary items.
Note
