NABO GSV 1260, Instruction Manual, Page: 51 / 91

2 1
7.. THE CONTR PANEL
Press the Power On/Off button ( 1 ), the End
Of Programme Indicator ( 6 ) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button (3) .
The selected program number can be
seen in the LED display
(2)
and the End Of
Programme Indicator will switch off.
The programme will start automatically
when the door is closed.
NOTE: If you decide not to start the
selected programme, please see the
"Changing a Programme" and "Cancelling a
Programme" sections.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
Indicator ( 6 ) will illuminate to indicate that
the salt chamber needs filling.
NOTE: When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
(
6
) will illuminate to indicate that the rins
aid chamber needs filling.
Delaying a Programme
Press the Delay button to delay the start
time of a programme for 3, 6 or 9 hours.
Pressing once will delay the start time for 3
hours, pressing twice for 6 hours, and three
times for 9 hours. The programme can be
selected first and the delay duration after,
or vice versa. Press the Delay Timer button
to change or cancel the delayed start time.
The remaining delay time will show on the
display and the light corresponding to the
delay duration (3h, 6h, 9h) will be on.
7.1. Changing a Programme
Follow the steps below to change a
programme while in operation.
Open the door and press the
Programme Selection button to
select a new programme.
After closing the door, the new
programme will resume the
course of the old programme.
NOTE:
Open the door slightly at first to
stop a programme before it is complete in
order to avoid water spillage.
7.2. Cancelling a Programme
Follow the steps below to cancel a running
programme.
=
Press and hold the Programme Selection
button for 3 seconds. The End Of Programme
Indicator will flash and the selected
programme number will show on the
display.
After closing the door of the
machine, the water discharging
process will start and contine for
30 seconds.When a programme
is cancelled, a buzzer will sound 5
times and the End Of Programme
Indicator will illuminate.
Open the door of your machine.
The selected programme can be
seen on the screen.