NABO GSV 1045, Instruction Manual

Page: 58 / 101

2 4
SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME
Machine is energized when the On/Off button is
pressed ,
one
dash appear
s
in the program display
and the end of program indicator turns on.
1
2
3
When you select a program with the
program selection button,the program
you select ( 1,
2,etc )appears on the
program display and the end of program
indicator turns off.
1. Press the Power On/Off key.
2. Select the program suiting your dishes via the Program Selection button.
3. If you wish , you can choose additional function.
4. Close door.The program starts automatically.
Switching on the machine
Program follow-up
Changing a programme
If you would like to change programs while a washing program is
in progress.
N ote: If you decide not to start
the
machine after selecting the program , just press the on/off
bu tton.Your machine will become ready for the new program selection when you
press the
on/off
button again.You can select the new program by pressing the program selection button.
End of program indicator on the control panel
turns on when the selected washing program is
completed .Your machine also gives a buzzer
sound for “5 times” when the program is
completed.
Do not open the door before the
program ends.
Note: When the door of the machine is opened in order to stop the washing program before
it is completed
,
first open the door slightly in order to avoid water spillage.
Open the door and select a new
program by pressing the
program selection button.
After closing the door , the
new program started will
resume the course of the old
program.