NA MultiFlash JR, User Manual

Page: 20 / 30

MANUAL FUNCTION
This menu function allows selection of the intensity of wash/blinder background color, strobe color, and strobe
functions. This functions as a stand-alone mode. Manual values are saved if power is shut down. A reset will
clear these values (see Menu Maps, pages 9-10).
Demo – In this menu the following demonstration scenes may be selected:
During the demo functions, using the <UP> and <DOWN> buttons will change the demo scenes. To exit
Demo mode, press the <EXIT > button. This mode works as a stand-alone mode. Even if the MultiFlash
is turned off, and then back on, the selected demo scene will be saved. While in the Demo menu, the
demonstration scene will play. When exited from Demo mode, the MultiFlash will return to a normal state
of operation.
Config – Configuration setup. In this menu the following functions may be selected:
DMX LOSS – Select desired function should the MultiFlash lose DMX signal:
HOLD – Hold the last received DMX values when DMX signal is lost
OFF – Do not hold the last received DMX values when DMX signal is lost. Also stops light output.
Fan – Cooling Fan:
AUTO – Fan speed is automatically controlled by the MultiFlash and will adjust according to temperatures
at normal operating levels.
ON – Fan cooling always is turned on.
Note: MultiFlash Q+, MultiFlash Rayzr and MultiFlash LR Q+ have a Power/Fan menu category. In this menu
you have three modes:
• Turbo Mode – Full Power, full fans when needed
• Theater Mode – Reduced power and fan noise
• Match/Compatibility – Reduced power and max. fan speed to match first generation MultiFlash output
Display – Automatic power on/off:
ON – Control display is turned on.
10s – Control display is turned off after 10 seconds of inactivity.
30s – Control display is turned off after 30 seconds of inactivity.
Thermometer – Internal temperature gauge:
The built-in thermometer tracks internal operating temperature. Pressing the <UP> and <DOWN> buttons
selects degrees Celsius or Fahrenheit.
Fade Time – Fade time setup. The operator can set the way the MultiFlash reacts to changing DMX values.
This is designed to allow the light output of the MultiFlash to react as smoothly as possible when crossfading
DMX values.
OFF – The MultiFlash will not change the smoothness of crossfading of values coming from the lighting controller.
Smart Fade – The MultiFlash will attempt to add smoothness to crossfading DMX values coming from the lighting
controller, but will also allow for very quick change of values where smoothness is not applicable.
Fixed Fade – The fade time for any change in DMX values can be set manually. The timing values can be set
from 0.01 to 2.50 seconds. Use the <Up> and <Down> buttons to change these values.
20