Setup and Connections
ESERV-1xT Serial Servers
17
ESERV-1xT
(Rev. 1210)
b.
On ESERV-12T models: Port 1 LED is On and the Port 2 LED is Off.
3.
The LEDs go back to their normal states when the device resumes normal operation.
RELOADING FACTORY DEFAULTS
To reload Factory Defaults,
press and hold the Mode switch for more than 10 seconds. The LED indicators
respond as follows:
1.
The Ready LED blinks three times per second while the button is being pressed.
2.
The serial server is in Factory Default Mode when:
a.
On the ESERV-11T: Port 1 LED and the Ready LED are both On.
b.
On the ESERV-12T: Port 1 LED and the Port 2 LED are both On.
3.
The serial server reloads all factory default configuration parameters.
4.
The LEDs go back to their normal states when the device resumes normal operation.
Note: Factor default parameters are listed in Appendix A
