(Revised 2012-06-30) page 14 of 165
FRONT PANEL:
From Left to Right:
Gigabit Ports
SFP Connections
RJ45 Ports
Auto sensing 10/100 Base-TX Connections
Fiber Ports
100 Base-FX Connections
Green LED lights when Power is supplied to the module and there are no faults. This light is
red when there is a fault.
NOTE
: The RJ45 data port has two LED’s located at the side of the connector. The bottom LED indicates
LINK status, and the top LED indicates ACTIVITY.
LED’s:
The table below describes the operating modes:
LED
Color
Description
GREEN
Power is Applied and there are no faults.
RED
Power is Applied and there is a fault.
OFF
Power is OFF
LNK
GREEN
10/100/1000Mb Link between ports
OFF
No Link between ports
ACT
GREEN
Data is active between ports
OFF
Data is inactive between ports
Summary of Contents for 7900 Series
