manualshive.com logo in svg

N-Tron 7026 Series, User Manual & Installation Manual, Page: 28 / 169

Share
Download
N-Tron 7026 Series User Manual & Installation Manual Download Page 28

For Sales and Support, Contact Walker EMD • www.walkeremd.com • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 

(Revised 2011-11-15)                                                                                                                                                                                       

Page 28 of 169

 

Administration – System, Continued… 

 
By selecting the Modify button, you will be able to change the switch‘s IP Configuration, Client ID, IP 
Address, Subnet Mask, Gateway, Name, Contact information, and the Location of the switch through the 
web management features, depending on the IP Configuration.  It is recommended to change the TCP/IP 
information through the Command Line Interface (CLI) initially, but it defaults to the following: 

IP Configuration    – Static 
IP Address  

– 192.168.1.201 

Subnet Mask  

– 255.255.255.0 

Gateway    

– 192.168.1.1 

 

 

 

Summary of Contents for 7026 Series










































































































































































Reviews:

No comments