(Revised 2011-11-18)
Page 80 of 157
IGMP – RFilter
The ‗rfilter‘ (
Router Multicast Data Filter
) function allows you to choose whether or not DATA frames
with KNOWN group multicast addresses are sent to the ‗router‘ ports (links to other switches). Control
packets (Join, Leave) will be sent to the router(s) regardless of this setting. ―KNOWN‖ is known from
dynamic IGMP Snooping operations.
The factory default is that the Router Multicast Data Filter is enabled for all ports, so any router ports do
NOT get DATA frames with KNOWN multicast destination addresses unless a join to a specific multicast
address has been received on that port.
Joins override an rfilter.
If rfilter is disabled, router ports do get DATA frames with KNOWN multicast destination addresses
Rfilter can be set for individual ports: any, all, or none. For each port, rfilter will have an impact only if that
port is manually or dynamically chosen as a router port.
Default configuration:
Summary of Contents for 7018TX
