19
Table 3–7 Settings in the Port Menu – Cont.
hd_flow <E | D> [port]
Enable | Disable half duplex
flow control.
Administrator only
This flow control is
effective when the
selected ports operate
in the half duplex
mode and when flow
control is activated in
the Switch menu.
speed <? |10H |10F? > [
port]
Displays | Sets transmission
rate/ duplicity of the ports
?
displays the possible settings
for the transmission rate and
duplicity of the ports.
10H -- set 10 Mbps, half
duplex.
10F -- set 10 Mbps, full duplex.
100H -- set 100 Mbps, half
duplex.
100F -- set 100 Mbps, full
duplex.
Administrator only
(The transmission
rate and duplicity of a
port set by the user
only takes effect if
autonegotiation is
disabled for this port.
When
autonegotiation is
disabled, the
transmission rate and
duplicity of an
608MFX port must
match the
transmission rate and
duplicity of the
connected partner
device.
Service Menu
Table 3–8 Settings in the Service Menu
Command
Description
Comment
info
Shows the basic settings of the
608MFX such as the MAC
address, IP address, hardware and
firmware versions.
passwd [admin | user]
Allows the entry of a new
password for the administrator or
user.
Administrator only
