N-Tron 308FX2, User Manual & Installation Manual, Page: 19 / 34

(Revised 2010-7-30) 19
CLI Tree of Menus

info (Show identification data)

SYSTEM (Open system menu)
nview (Get information about N-View function)
info (Get information about N-View)
enable/disable (Enable/Disable N-View)
info1 (Get information about system - ports 1->8)
info2 (Get information about system - ports 9->16)
restore (Restore factory defaults) **Note: Power cycle is required when completed.

SWITCH (Open switch menu)
ports (Reconfigure Individual Port Parameters)
info (Get info on Port Parameters)
enabling (Enable or disable each port)
negotiate (Select autonegotiate or not for each port)
speed10 (Force 10 Mb speed for each port)
speed100 (Force 100 Mb speed for each port)
half (Force half duplex for each port)
full (Force full duplex for each port)
crossover (Force crossover connection for each port)
‘filters’ are on 308FX2 only:
filters (Select traffic filter(s))
info (Get info on Filters)
dis_nring (Disable filters for N-Ring)
(or „en_nring‟ if currently disabled )
dis_ring600 (Disable filters for 600 series ring)
(or „en_ring600‟ if currently disabled )