Primary inspection when lifting function is error
Check 2 fuse position
1. Check fuse 5A at position 1 (Fixture 1)
2. Check fuse at car battery (Fixture 2)
* If both fuses are normal, please move the mechanic
into resting position (Fixture 12)
Manually handling during
automatic function error
Status : Fuse is normal, ready for use
Status : Fuse is damaged, do not use
1
2
3
4
6
5
1. Remove the screw from hydraulic (counter clock-wise)
using the wrench (fixture 1).
2. Adjust the mechanic part to position 2.
3. Loosen the screw using the wrench and slide the screw
to unlock position (fixture 3).
4. Adjust the mechanical part to position 4
(apply only to model with slider)
5. Loosen the screw using the wrench and slide the screw
to unlock position (fixture 5).
6. Move mechanical part back and screw all parts back.
Manual handling during automatic function error
Primary inspection and diagnostic
1
2
For enquiry/equipment error report
095-701-7111
Before manually handling the mechanical
part, please report
095-701-7111