EN
16
8.
MANAGING TWO MOBILE PHONES (OR BLUETOOTH DEVICES)
The
B901
system can be hooked up to two phones (or Bluetooth) devices at the same time.
The second phone (secondary device) can receive calls but not make them.
To pair up the second Bluetooth phone (secondary device):
•
Make sure the B901 is turned off.
•
Put the system in the “Configuration” menu: press the “
ON
” key and keep it pressed for 4
seconds, until you hear the voice announcement “
Configuration
”.
•
Press the “
5
” key until you reach the option “
Second mobile phone pairing
”.
•
Turn on the search for Bluetooth devices (smartphone, GPS, MP3 reader) on the device.
•
Select the N-Com system from the list. If a password is requested, enter the code 0000 (four
zeros).
•
After a few seconds, the connection between the two devices is activated.
Once the Bluetooth device has been paired up, connection is automatic when the system is turned
on.
If you wish to connect a mobile and a satellite navigator for motorbikes, it is recommended to pair up
the mobile as the MAIN DEVICE (chapter 6) and the navigator as the SECONDARY DEVICE, following
the procedure described above.
9.
SMART NAVI SYSTEM
The “SMART NAVI SYSTEM” function allows you to listen to navigator directions coming from the
smartphone even during an intercom call or while listening to the FM Radio.
The audio stops to allow transmission of the navigator directions from the smartphone and is
automatically re-established at the end of said instructions.
The “SMART NAVI SYSTEM” function is disabled by default on the device.
You can enable / disable the function from the Configuration Menu (Chapter 5).
N.B.
: With the Smart Navi System enabled, all audio information coming from the smartphone (for
example, notification sounds) temporarily stops the audio under way.
You can enable / disable the “SMART NAVI SYSTEM” function by using the N-
Com EASYSET program or the N-Com EASYSET APP.
10.
MUSIC VIA BLUETOOTH
To pair up an Mp3 device to the B901 system, follow the procedure illustrated in Chapter 6.
Play music (Play)
Briefly press “
ON
”.
Pause function (Pause)
When the player is connected and playing music, briefly press
“
ON
”.
Next track (Skip)
When the player is playing music, press “
5
” for about 2 seconds.
Previous track (Rew)
When the player is playing music, press “
6
” for about 2seconds.