◆
Installation
1.
Move to this bench at the desired place and un-pack carefully.
2.
The unit should be leveled in all direction (side by side, front to back and ground)
and free from vibration.
3.
Connect electric power plug to proper outlet.
※
Check the electricity specification on serial label before connecting the power plug
(220V/110V, 50Hz/60Hz)
◆
Operation
1.
Turn on the power s/w to operate the product.
2.
Turn on the UV lamp about 30 minutes before the experiment for sterilization of the chamber.
3.
Turn off the UV lamp to start the experiment and turn on the FL light
(if need to light on in chamber).
UV lamp must be turned off while working in chamber.
4.
The strength of wind can be controlled by the wind control s/w ; place the switch at S.WIMD
to use the stronger wind and place it at W.WIND to use the weaker wind and place it at the
middle to turn off the wind.
OPERATION