www.n-biotek.com
N-BIOTEK
OM-NB-101M/101MT/101MC (Ver. 2009.07) 9/13
(2) You can set the RPM using UP(
▲), DOWN(▼) key
Press “SET” key again after set RPM, than LED displayed as “r SAVE” as below.
RPM and Time must be saved when user push set-key again.
4) Time Set-up
(1) Press the “RPM/TIME” key for the approximately 1 or 2 seconds until LED displayed
“t 00.00” as below.
(2) Press the “SET” key. Then LED will display setting time and can be set the time using
UP(
▲), DOWN(▼) key as desired set point time.
At first, you can set the hour using UP(
▲), DOWN(▼) key and press “SET” key.
You can set the minute using UP(
▲), DOWN(▼) key after set the hour.
Press “SET” key again after set time (hour and minute), then LED display as “t SAVE” as
below.
* Time set point range is maximum 47 hr 59 min.
If you want to use this incubator continually, you must set value as 00:00.
When you set the time like above and operate instrument, -END- is displayed after a minutes.
But shaking is well running without stop till reaching desired time.
After pushing start button under time set-up, the instrument would be stopped with
displaying
–END- when the time is reached at set time.