STORM-6, STORM-8 25 Rev.01-2021
3.
Press the Function button to set latching or momentary functionality:
LED 8 (yellow) off = momentary relay functionality
LED 8 (yellow) on = latching relay functionality
4.
Press the Select button to move to the next available relay.
After moving through all available relays, the receiver exits the settings menu and restarts.
Select Operating mode
Do not perform this action when the receiver is in a session with another transmitter. The radio communication may be
interrupted or broken.
NOTE! Go to the Operating modes pages to see the Operating modes available when transmitting in continuous/discontinuous
radio mode. Operating modes do not work for both radio modes.
1. Press the Function button 4 times. LED 10 lights (orange).
2. Press the Select button to see the Operating mode in use.
The relay LEDs light (red) according to the table below, LED 10 flashes (orange).
*Operating modes reserved for specific customer applications.
3. Press the Function button to move to the next available Operating mode.
4. Press the Select button to select Operating mode.
The receiver exits the Operating mode menu and restarts.
NOTE! The first relay in the row is relay 5. The second relay is relay 1.
Operating mode 1
Correspondence between command buttons and relays activated in the receiver
